Water-based frame pipe/climbing frame/steel mold anti-rust paint

short description:

This product is prepared with water-based acrylic/alkyd anti-rust functional resin, non-toxic and environmentally friendly anti-rust pigment, and does not contain organic solvents.

Product Detail

Product Tags

Product performance

It has good durability (more than 3-4 years of use) and decorative properties, and the color is lasting and bright; good rust-proof sealing performance, acid and alkali salt spray resistance, water-based environmental protection.

Application range

This product is prepared with water-based acrylicalkyd anti-rust function (1)

Suitable for general requirements of scaffolding, machinery, template, dip coating, spraying, good sag resistance, high gloss.

Construction Description

Surface Treatment: The performance of a coating is generally proportional to the degree of surface treatment. When painting on the matching paint, the surface is required to be clean and dry, free of impurities such as oil and dust; it must be stirred evenly before construction. If the viscosity is too large, it can be diluted with clean water to the construction viscosity. In order to ensure the quality of the paint film, we recommend adding 10%-20% of the original paint weight. The relative humidity is less than 85%, and the construction surface temperature is greater than 10°C and greater than the dew point temperature by 3°C.

Recommended packages

FL-109/FL-1001M 1-2 times, thickness 30-50μm.

Storage and Packaging

Storage temperature≥0℃, packing 20±0.1kg


Customers should read our product description in detail and construct according to our recommended conditions. For construction and storage conditions beyond our recommended range, please consult our technical department, otherwise abnormal phenomena may occur.

This product is prepared with water-based acrylicalkyd anti-rust function ( (4)

Supporting construction technical parameters

Gloss  Matte, Glossy
Volume solid content  about 40%
Specific gravity  1.2kg/L
Recoating time  after the last coat of paint is dry
Adhesion  Grade 1
Color  Please refer to the anti-corrosion color card of the bell tree company
Theoretical coating rate  6.7m²/kg (dry film 50 microns)
Surface dry (humidity 60%)  15℃≤1h, 25℃≤0.5h, 35℃≤0.1h
Hard working (humidity 60%)  15℃≤10h, 25℃≤5h, 35℃≤3h
Shock resistance

Product packaging

Product packaging6
Product packaging2
Product packaging7
Product packaging3
Product packaging8
Product packaging5
Product packaging9(1)

  • Previous:
  • Next:

  • Write your message here and send it to us